FormCem-Light 2515 is a mineral oil-based mould release agent designed for use on timber, plywood, and light steel shuttering. It is applied to formwork surfaces before concrete is poured to prevent the concrete from bonding with the shuttering.
FormCem-Light 2515 creates a thin barrier film on the shuttering surface, allowing clean and easy stripping after the concrete has set. It extends the reuse life of shuttering panels and reduces labour time during stripping.
Suitable for residential and light commercial construction where timber and plywood shuttering is commonly used.
Form
Liquid — oil based
Appearance
Clear to light amber liquid
Base
Refined mineral oil
pH Value
Neutral
Flash Point
Above 60°C Coverage 8 to 12 sq. me
Packaging
20 litre can / 200 litre HDPE drum
Shelf Life
24 months from date of manufacture
Clean and easy stripping — reduces labour time and effort significantly
Extends shuttering panel life — more reuse cycles per panel
Leaves a clean concrete surface with no oil staining or discolouration
Low odour — suitable for enclosed or residential construction sites
Easy application by spray, brush, or roller
Cost-effective — low dosage required per square metre
Clean the shuttering surface to remove old concrete, dust, and debris before application
Apply a thin, uniform coat of FormCem-Light 2515 using a brush, roller, or spray
Ensure complete coverage — do not leave dry patches
Avoid excess application — too much oil can cause surface defects on the concrete
Allow a few minutes for the film to settle before placing reinforcement and pouring concrete
Reapply before each pour on cleaned shuttering surfaces
Timber and plywood shuttering for residential construction
Light steel panel shuttering for columns, beams, and slabs
Small and medium construction sites — buildings, villas, and housing projects
Standard precast moulds for general precast elements
Not recommended for heavy-duty steel or aluminium formwork — use FormCem-Heavy for those
Store in original sealed containers in a cool, dry area away from open flames
Flash point above 60°C — keep away from heat sources
Shelf life is 24 months from date of manufacture
Do not store near food, drinking water, or animal feed
Keep containers sealed when not in use
Keep away from open flames and sparks — oil based product
Avoid prolonged skin contact
Wash skin with soap and water after handling
In case of eye contact, rinse with clean water immediately
Do not ingest — keep away from children
Refer to MSDS for complete safety information
RheoCem-Retain 2316 is a high-range water-reducing and retarding concrete admixture based on polycarboxylate ether (PCE) technology. It is designed specifically for ready-mix concrete that needs to stay workable for a longer period — particularly during long-distance transport and hot weather conditions.
RheoCem-Retain 2316 keeps concrete workable for 90 to 180 minutes depending on the mix design, temperature, and dosage. This makes it the most suitable product for RMC plants supplying concrete to sites that are 30 to 90 minutes away from the batching plant.
Compatible with fly ash, GGBS, silica fume, and all types of Portland cement. Conforms to IS 9103 and ASTM C-494 Type G.
RheoCem-Ultra 2411 is a high-performance polycarboxylate ether (PCE) based superplasticizer developed for high-strength and high-grade concrete applications. It delivers high water reduction and excellent workability retention, making it suitable for M50 and above concrete grades, self-compacting concrete, and large infrastructure projects.
RheoCem-Ultra 2411 works at very low water-to-binder ratios — conditions where standard admixtures lose effectiveness. It ensures excellent flowability and compaction even in congested reinforcement zones without requiring additional vibration in most cases.
Compatible with silica fume, GGBS, fly ash, and all Portland cement types. Conforms to IS 9103 and ASTM C-494 Type G and F.
RheoCem-Flow 2304 is a polycarboxylate ether (PCE) based concrete superplasticizer designed for standard ready-mix concrete production. It improves the workability and flowability of concrete without increasing water content, making it suitable for M25 to M35 grade concrete used in everyday residential and commercial construction.
RheoCem-Flow 2304 works by coating cement particles and dispersing them evenly through the mix. This allows the concrete to flow freely and pump easily without adding extra water — which would otherwise reduce strength and durability.
Compatible with all types of Portland cement including OPC 43, OPC 53, PPC, and blended cements with fly ash or GGBS. Conforms to IS 9103 and ASTM C-494 Type G.
CureCem-Wax 2402 is a wax-based, white-pigmented concrete curing compound. When applied to freshly
placed concrete, it forms a continuous white film that seals the surface and prevents moisture from
evaporating during the critical curing period.
The white pigment reflects sunlight, helping to keep the concrete surface cooler — especially useful in hot
and sunny conditions. The white film also acts as a visual guide, showing workers which areas have
already been treated.
CureCem-Wax 2402 replaces traditional curing methods like water ponding and wet gunny bags, saving
water, labour, and time. Conforms to IS 9862 and ASTM C-309.
